Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual - Manual (Page 58)

Publication ENET-UM527E-EN-P - October 2006
58 Use Data Views to Access Controller Data
3. Click the Add button to add the tag you just specified.
You can add multiple tags to the data view, as long as there are
no more than 2500 tags in all the data views of one web server
module.
4. Click the Create View button to create the data view.
Add Tags to a Data View
When you add a tag to a data view, you specify the following
information.
In This Field Specify Details
Slot Slot number of the controller
Click on the question mark next to Slot
-OR-
Use the Chassis Browse page to validate the controller slot.
Tag Name Name of the tag These fields must match exactly what is specified for the tag in the selected
controller. To verify tag information, you can use:
• RSLogix 5000 software to view the controller project.
• RSLinx software to navigate to the controller and view tags.
Data Type Data type of the tag
Display As Display type to use for the tag
Access Whether you require Administrator,
Write, or Read access to view the
tags in this data view The default access level is Administrator.
The access you specify applies to the whole data view, not just the tag. If you
have multiple tags with different access levels in the same data view, the
web server assigns the highest (most access) level to the data view.
See chapter 6 for details on access levels.