Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual - Manual (Page 37)

Publication ENET-UM527E-EN-P - October 2006
Configure a Network Address For a Web Server Module 37
The hardware address is on a sticker located on the side of the
web server module. The hardware address will be in a format
similar to: 00-0b-db-14-55-35.
The New Entry window displays the MAC address you selected
and prompts you to enter the IP address.
3. Enter the IP address of the module.
You can also enter the host name and a description of the
module.
4. Click OK.
The device is added to the Relation List.
5. To permanently assign this configuration to the module,
highlight the module and click on the Disable BOOTP/DHCP
button.
When power is recycled, the module uses the configuration you
assigned and does not issue a request.