Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual - Manual (Page 27)

Publication ENET-UM527E-EN-P - October 2006
Getting Started 27
Configure the Time Server
Configuring the Time Server helps ensure that files you save to the
web server module have accurate date and time stamps.
Complete the following steps to configure the time server.
1. In the organizer on the left, select Administrative Settings
>
Server Management
> Time Settings.
2. Click the radio button to specify the time/date source according
to your system.
For more information, see chapter 3.
To Select
Get the date and time from an SNTP
server on the network. SNTP Time Server
Get the time and date from the local
controller Query Controller
Specify your own date and time Manual Time Entry