Tweco 200 XT Auto-Cut 400V - Manual (Page 18)

AUTO-CUT 200 XT
2-2 SPECIFICATIONS Manual 0-5284
2.05 Power Supply Specifications & Electrical Requirements
Auto-Cut 200 XT™Power Supply Specifications
Max OCV (U0) 425 vdc
Max Output Current 200 Amps
Output Voltage 60 - 170 vdc
Duty Cycle Rating 100% @ 200A @ 200V (40 kW)
Operating range 14°F to 122°F (-10°C to + 50°C)
Power Factor 0.94 @ 200 ADC Output
Cooling Forced Air (Class F) and Liquid Cooled
Auto-Cut 200 XT™Power Supply
Input Power Input Current Suggested Sizes (See Note)
Voltage Freq. 3-Ph 3-Ph Fuse (Amps) Wire (AWG) Wire (mm 2 )
(Volts) (Hz) (kVA) (Amps) 3-Ph 3-Ph 3-Ph
400 50/60 41 60 100 #6 16
* Suggested wire size based on United States NFPA 70 National Electrical Code 2011
edition published by the National Fire Prevention Association. Listings are from table
400.5(A)(2) for flexible cord of certain types rated for 75 deg C in ambient tempera-
tures up to 30 deg C. Using wires of lower temperature rating or different insulation
type may require larger wire size. Derate for higher ambient.
These are suggestions only. Always refer to your local and national codes that apply to
your region for final determination of correct wire type and size.
CAUTION
Fuse and wire sizes are for reference only. The installation must conform to national and local codes for the type
and method of wire being used.