04 torch consumables installation, Torch consumables installation -3, Auto-cut 200 xt – Tweco 200 XT Auto-Cut 400V User Manual
Page 79
AUTO-CUT 200 XT
Manual 0-5284
TORCH INFORMATION
7-3
7.04 Torch Consumables Installation
1. Install the consumables as follows:
Art # A-03887
WARNINGS
Do not install consumables into the Cartridge
while the Cartridge is attached to the Torch Head.
Keep foreign materials out of the consumables and Cartridge.
Handle all parts carefully to avoid damage,
which may affect torch performance.
NOTE
For 200-Amp consumables, when replacing the shield retainer or the shield cup, assemble these two parts first
before assembling the other consumables.
Shield
Retainer
Shield Cup
Shield Cap Shield Gas
Distributor
Tip
Plasma Gas
Distributor
Electrode
Cartridge
Art # A-08303
A
B
C
1 - Assemble “A” 200 A only.
2 - Assemble “B”.
3 - Assemble “B” to “C”.
4 - Assemble “A” to “B-C” assembly.