Wheatheart X160 Series - Manual (Page 100)

3. A SSEMBLY W HEATHEART - G RAIN A UGERS
X160-85, X160-105, X160-125
100 30875 R0
3.17. INSTALL THE MANUAL CONTAINER
Before beginning installation, ensure that all winch / auger lift controls are locked
in place and shut down and/or lock out auger.
1. Remove the transparent window from the side of the boot.
2. Slide the tab on the bottom of the manual holder into the bracket on the boot,
and fasten the top of the manual holder to the boot using two
1/4” x 3/4” bolts [9900800], two 1/4” flat washers [9900683], and two
1/4” locknuts [28449].
3. Replace the transparent window.
Figure 3.54 Installing the Plastic Manual Container