Wheatheart X160 Series - Manual (Page 129)

W HEATHEART - G RAIN A UGERS 7. M AINTENANCE AND S TORAGE
X160-85, X160-105, X160-125
30875 R0 129
Figure 7.3 Upper Flight Bearing Grease Point
To grease:
1. Use SAE multi-purpose high-temperature grease with extreme pressure (EP)
performance or SAE multi-purpose lithium-based grease.
2. Use a hand-held grease gun only.
3. Wipe grease fitting with a clean cloth before greasing to avoid injecting dirt
and grit.
4. If a fitting will not take grease, remove and clean thoroughly. Also clean
lubricant passageway. Replace fitting if necessary.
5. Replace and repair broken fittings immediately.
7.3.4. H
OPPER
L
IFT
C
ABLE
I
NSPECTION
Check the cable for damage such as fraying, kinking, or unwinding. Replace if
damaged.
To replace:
1. Unwind the winch drum and remove the cable clamps.
2. Free the cable from the winch and pulleys.
3. Remove the cable clamps that secure the hook in place.
4. Reverse the above steps to install the new cable.