Wheatheart X160 Series - Manual (Page 49)

W HEATHEART - G RAIN A UGERS 3. A SSEMBLY
X160-85, X160-105, X160-125
30875 R0 49
3.2.6. A
SSEMBLE THE
PTO S
HIELD
A
SSEMBLY
1. As shown in Figure 3.12, align the PTO shield front on the PTO shield rear
and secure it with three 5/16” x 3/4” bolts [19538] and 5/16” whiz nuts.
2. Insert the hair pin to lock PTO shield with base.
3. Set the assembled PTO shield assembly aside for use during the installation
of the speed reducer.
Figure 3.12 Assemble the PTO Shield Assembly
Table 3.7 Assemble the PTO Shield Assembly
Diagram # Description Part # Quantity
1 PTO shield rear 20746 1
2 PTO shield front 20745 1
3 5/16” x 3/4” bolts 19538 3
4 5/16” whiznuts 19595 3
5 Lock pin n/a 1
6 Hairpin 19463 1
6
5
1
2
1
3
4
3
4