Wheatheart X160 Series - Manual (Page 105)

W HEATHEART - G RAIN A UGERS 4. T RANSPORT
X160-85, X160-105, X160-125
30875 R0 105
Figure 4.3 Hopper in Transport Position
Important:
Intake feed side of hopper must face main auger when in transport (Figure 4.3)
9. Clear all untrained personnel from transport zone.
10. To place hopper into transport position:
a. Attach cable hook to the loops inside the hopper.
b. Fully raise hopper with intake side facing towards the main auger as shown
in Figure 4.3.
c. Secure hopper to lift arm with the hopper lock, saddle pins, and hairpins
provided.
CAUTION
If auger wheels are partially or fully buried in
snow or grain, failure to clear the area around
the wheels before moving may cause damage
to the auger or result in serious injury.

SAFETY CHAIN
AND HOOK
WINCH CHAIN
AND HOOK
WARNING
Beware of overhead obstructions and
electrical wires and devices. See
“Specifications” on page 139 for minimum
transport heights.