Wheatheart X160 Series - Manual (Page 126)

7. M AINTENANCE AND S TORAGE W HEATHEART - G RAIN A UGERS
X160-85, X160-105, X160-125
126 30875 R0
7.2. FLUIDS AND LUBRICANTS
G EAR O IL
Use SAE approved 90W or equivalent gear oil.
G
REASE
Use SAE multi-purpose high-temperature grease with extreme pressure (EP)
performance or SAE multi-purpose lithium-based grease.
7.3. MAINTENANCE PROCEDURES
7.3.1. V
ISUAL
I
NSPECTION
Before beginning visual inspection, check auger wheels and ensure that all
operators are aware of safety procedures.
When inspecting, look for possible defects and for the following:
• Be sure all guards are in place, functioning, and not damaged.
• Make sure access, service, and cleanout covers are in place and secure.
• Check that all hardware is in place and secure.
• Inspect hydraulic hoses and fittings for leaks and wear. Fix or replace
where necessary.
• Inspect around the machine for evidence of hydraulic leaks.
• Examine flighting for damage or unusual wear.
• Inspect the truss cables for proper tension and possible damage such as
fraying, kinking, or unwinding.
• Inspect hopper winch cable for fraying, kinking, unwinding, or other possi-
ble damage.
• Examine tires for gashes, uneven wear, or loss of air pressure.
• Be sure all safety decals are in place and legible.
• Check the PTO shield & replace if damaged.