Install std. mid-wing brackets – Great Plains 3N4010HDA Predelivery Manual User Manual
Page 17
Great Plains Manufacturing, Inc.
Air Drill Pre-Delivery
15
10/10/2008
196-444Q
Install Std. Mid-Wing Brackets
42. Select two:
806-172C U-BOLT 3/4-10 X 10 1/32X11 1/2
From the centerline of the inside U-Bolt installed at
step 38, measure toward drill center, approximately:
35
1
⁄
2
in (90cm)
Insert a U-bolt
from drill front, under the hoses.
Insert the second U-Bolt 7
1
⁄
2
in (19cm) further in.
43. Select one:
196-291H 40P WEIGHT BRACKET WLDMNT
and four sets:
804-023C WASHER LOCK SPRING 3/4 PLT
803-027C NUT HEX 3/4-10 PLT
Position the bracket weldment
on the U-Bolts
,
and adjust the placement as necessary to clear tube
weldments, web plates, grease banks, marker parts
and secure with lock washers
and nuts
.
44. Select one:
197-062D WEIGHT BRACKET ADJ LEG
and two sets:
802-057C HHCS 5/8-11X2 1/4 GR5
804-019C WASHER FLAT 5/8 USS PLT
804-022C WASHER LOCK SPRING 5/8 PLT
803-021C NUT HEX 5/8-11 PLT
Orient the adjustment leg
toward the inside (cen-
ter of drill), and secure with bolts
, flat washers
, lock washers
and nuts
.
45. Repeat step 42 through step 44 for the right wing.
Figure 11
Weight Bracket, Standard Mid-Wing
28206
U
D
F
B
L
R
21
51
52
40
56
25
53
42
33
2
56
56
21
53
42
21
56
53
42
25
33
51
52
40
25
33
51
52
40