Install primary hoses, Bulkhead port primary hose length, Bf l r – Great Plains 3N4010HDA Predelivery Manual User Manual
Page 26
24
3N-4010HDA and ADC2350B
Great Plains Manufacturing, Inc.
196-444Q
10/10/2008
Install Primary Hoses
72. Select the supply of:
990-125R SEED HOSE 2 1/2 ID KANAFLEX
This is the larger diameter hose.
73. Cut six (6) lengths of hose from this supply, two of
each length in the table below.
Note: Any remaining length of this hose is surplus.
Do not use it for seed delivery, or the rates
to the towers may be imbalanced.
74. Select the two outside 31.5 ft (9.6m) lengths of:
990-125R SEED HOSE 2 1/2 ID KANAFLEX
and four (4):
800-180C 2 1/2 AIR HOSE BAND CLAMP
Connect these to bulkhead ports
and
.
Route them to the outside wing towers,
and
respectively. Route must pass through the hoops at
the wing pivots. Secure ends with clamps
.
Figure 24
Tower Primary Hose Routing, Left Wing
27235
3
2
1
Bulkhead
Port
Primary Hose Length
Bulkhead
Port
Tower
Number
Tower
Location
Hose Cut Length
c
1
Left Outside
31.5 ft (9.6m)
b
2
Left, Mid-Wing
24 ft (7.32m)
a
3
Left Center
10 ft (3.05m)
f
4
Right Center
10 ft (3.05m)
e
5
Right Mid-Wing
24 ft (7.32m)
d
6
Right Outside
31.5 ft (9.6m)
73
3
2
1
f
e
d
c
b
a
B
F
L
R
1
PORT
1
PORT
1
P
O
R
T
66
66
28
c
d
1
6
28