Great Plains ADC2220 Operator Manual - Manual (Page 49)

Great Plains Manufacturing, Inc. Table of Contents Index Loup II Monitor Operation 45
2012-10-17 Table of Contents Index 167-073M
Refer to Figure 46
On pressing OK, the display returns to the normal
operating screen, with the acknowledged
“Should be seeding” Alarm displayed in active alarm
window.
Low Fan Speed
Refer to Figure 47
A Low Fan Speed alarm occurs when the Fan Speed has
fallen below the set alarm point. The cause of the
problem must be resolved on the machine. A similar
alarm occurs for excessive fan speed.
Figure 46
Acknowledged: Should Be Seeding
29035
Figure 47
Alarm: Low Fan Speed
29036