Great Plains ADC2220 Operator Manual - Manual (Page 55)

Great Plains Manufacturing, Inc. Table of Contents Index Loup II Monitor Operation 51
2012-10-17 Table of Contents Index 167-073M
Refer to Figure 58
Before entering the Learn Mode, be sure to unplug all
the sensors that have a 3-pin connector, i.e. Ground
Speed Sensor, Shaft Sensors, Hopper Sensors,
Population Sensors & Blockage Modules. (Blockage
Sensors have a 2-pin connector and can be plugged into
their appropriate connection on the blockage harness.)
Procedure
1.
Press the Power Button to turn the monitor on.
Refer to Figure 57
2.
Press the DOWN arrow to highlight Learn New
System and Default Settings
Figure 58
Startup: Learn New System
29046
0 20
INCHE S O F WA TER 15
25
10
MAG NEH ELIC
5
FAN SPEED
FRONT
ME
TER
BIN
LEVEL
LEVEL
BIN
REAR
ME
TER
TO
IMPLEMENT
GROUND SPEED
Figure 57
Cart Sensor Locations
16206