Communication error – Great Plains ADC2220 Operator Manual User Manual
Page 53
Great Plains Manufacturing, Inc.
Loup II Monitor Operation
49
2012-10-17
167-073M
Communic
ation Error
Refer to Figure 54 and Figure 55
A Communication Error occurs any time the monitor
loses communication with a learned sensor. This
includes Ground Speed, Shaft, Fan Speed, Hopper
sensors and Blockage Modules.
If a communication error is received:
• Check that all harness connections are securely
connected.
• If no loose connections are found, check all wiring to
ensure the wires have not been broken.
If any of the listed alarms persist or if an alarm is
displayed that is not listed contact your Great Plains
dealer.
When acknowledged, the alarm appears in the active
alarm window of the normal operating screen.
Figure 54
Alarm: Communication Error
29043
Figure 55
Acknowledged: Communication
Error
29044