Great Plains ADC2220 Predelivery Manual - Manual (Page 17)

3/3/2006 167-088Q-RUS
15 Cart Assembly
23439
23448
23438
Figure 19
Attach Tire to Frame
Refer to Figure 19
22. Attach tire to hub assembly.
23. Using previously removed wheel nuts, secure tire to
hub assembly.
24. Tighten all wheel nuts.
25. Repeat steps 9 - 12 on opposite side of frame.
NOTE: Always check to make sure that tires are properly
inflated. Refer to Tire Inflation Chart on page 49.
Jack
Refer to Figure 20
1. Attach jack to frame. Use pin to secure jack to frame.
NOTE: At this point during setup, it is okay to remove lift
straps so that assembly may be completed.
Hitch Strap
Refer to Figure 21
1. Attach hitch strap to tongue. Align top hole of
hitch strap with 2nd hole from top in the frame.
Insert 1 1/4-7 X 11 bolt through frame and hitch.
Secure with washer and hex nut.
2. Insert 1 1/4-7 x 9 1/2 bolt, washer and safety
chain through 3rd hole from top in the frame and
bottom hole in the hitch. Secure with washer
and hex nut.
Figure 20
Jack (in use)
Figure 21
Hitch Strap