Great Plains ADC2220 Predelivery Manual - Manual (Page 42)

167-088Q-RUS 3/3/2006
ADC2220 & NTA 3510 40
Right Wing Frame
Coulter Blade Arms
Refer to Figure 90
NOTE: On the right wing frame, for shipping pur-
poses, the coulter blade arms were turned to the
side. Coulter blade arms will need to be turned
back to the correct position.
Refer to Figure 91
1. Loosen back bolt of coulter arm with a
wrench.
2. Turn coulter blade arm to correct position.
Arm should be positioned straight out from
frame, not to the side.
Coulter Blades
Refer to Figure 89
1. Attach coulter blade to coulter hub assem-
bly using bolts.
NOTE: If attaching turbo coulter blades,
blades must attach properly with rotation ar-
row pointing toward direction of travel.
2. Attach remaining blades to coulter hub as-
semblies.
24110
23343
Figure 89
Coulter Blades
24147
24148
Figure 91
Loosen Back Bolt
Figure 90
Coulter Blade Arm