Great Plains ADC2220 Predelivery Manual - Manual (Page 47)

3/3/2006 167-088Q-RUS
45 Implement Assembly
Figure 103
Openers on Frame
Refer to Figure 103
2. Stagger openers on wing frame as shown.
3. Secure each opener to frame and parallel
opener mount plate with a 5/8” bolt through top
hole of opener and opener mount plate.
4. Secure opener to frame and parallel opener
mount plate with a 5/8” u-bolt through the bot-
tom holes of opener and opener and mount
plate.
5. Secure bolt and u-bolt with 5/8” lock washer
and 5/8” hex nut.
6. Repeat steps 2-5 to install openers.
Refer to Figure 104
7. Insert pin roll (2) into press wheel arm adjust-
ment handle (1).
8. Place press wheel arm adjustment handle (1)
down through opener. From underneath open-
er, attach opener trunion (4) to press wheel arm
adjustment handle (1). Secure with spring (3)
and pin clevis (5).
24184
Figure 104
Press Wheel Arm Adjustment Handle
24155
24156