Great Plains ADC2220 Predelivery Manual - Manual (Page 41)

3/3/2006 167-088Q-RUS
39 Implement Assembly
24142
24143
Figure 88
Gauge Wheel Tires
Figure 86
Attach Gauge Wheel Arm
Gauge Wheels
Refer to Figure 86
1. Attach gauge wheel arm to backside of left
wing frame.
2. Secure gauge wheel arm to frame using
wing pivot pin (2) and pin roll (1).
Refer to Figure 87
3. Remove tie-down strap and hydraulic cylin-
der from frame.
4. Attach base end of gauge wheel hydraulic
cylinder to eyebolt weldment on gauge
wheel.
5. Secure rod end of hydraulic cylinder to
gauge wheel arm using pin and cotter pin.
Refer to Figure 88
6. Attach gauge wheel tire (1) to gauge wheel
hub assembly (2). Secure tire to hub with
wheel nuts.
7. Repeat step 6 to install gauge wheel tire on
other side of gauge wheel arm.
24144
Figure 87
Attach Hydraulic Cylinder