Great Plains ADC2220 Predelivery Manual - Manual (Page 40)

167-088Q-RUS 3/3/2006
ADC2220 & NTA 3510 38
Left Wing Frame
Refer to Figure 82
1. Attach lift straps to the left wing frame in the
rack.
!
CAUTION!
Obey all safety instructions from lifting equipment
manufacturer. Be sure lift straps are securely at-
tached prior to lifting. Be sure lifting equipment has
enough capacity to lift implement.
2. Unscrew and remove all bolts securing left
wing frame to rack.
3. Using a forklift or other implement, remove
left wing frame from rack.
24125
Figure 82
Attach Lift Straps to Left Wing Frame
Refer to Figure 83
4. Carefully lower wing frame onto ground. Re-
move lift straps. Replace straps so frame
can be lifted in position.
5. Align left wing frame and center section
frame.
24126
Figure 83
Align Frame
Refer to Figures 84 and 85
6. Secure wing frame to center section in both
front (figure 84 ) and back (figure 85) of im-
plement with pin.
24128
Figure 84
Secure Wing Frame to Center Frame
(Front of Implement)
24127
Figure 85
Secure Wing Frame to Center Frame
(Back of Frame)