Great Plains ADC2220 Predelivery Manual - Manual (Page 9)

3/3/2006 167-088Q-RUS
7 Introduction
Before You Start
Read and understand the owners manual for your
implement. A basic understanding of how the drill
works will aid in the pre-assembly, assembly, set-
up and operation of your drill.
Perform these checks before setting up your
implement.
1. Read and understand “Important Safety Infor-
mation,” beginning on page 1.
2. Check that all working parts are moving free-
ly, bolts are tight, and cotter pins are spread.
3. Check that all grease fittings are in place and
lubricated.
4. Check that all safety decals and reflectors are
correctly located and legible. Replace if dam-
aged.