Great Plains ADC2220 Predelivery Manual - Manual (Page 22)

167-088Q-RUS 3/3/2006
ADC2220 & NTA 3510 20
Figure 33
Attach Lift Straps to Rear Bin
Figure 34
Rear Bin
Refer to Figure 33
14. Attach lift straps to rear bin. NOTE: This will
be the bin with the slow moving vehicle de-
cal.
15. Unscrew and remove all bolts securing rear
bin to rack.
16. Using forklift or other implement, carefully re-
move rear bin from rack.
Refer to Figure 34
17. Once bin is removed from rack, carefully
lower bin to ground. Remove lift straps from
bin.
NOTE: Be careful when handling bins. To
prevent damage, bins should be supported
at all times.
18. Reposition lift straps on bin so bin may be
raised with forklift as shown in Figure 34.
19. Raise bin from ground using forklift.
Refer to Figure 35
20. Place rear bin (1) on air drill cart frame. Make
sure front of the bin (1) is toward front of frame
(2). NOTE: The flat side of the rear bin is
the front.
23058
23059
23061
Figure 35
Rear Bin to Frame