Implement assembly – Great Plains ADC2220 Predelivery Manual User Manual
Page 31
Advertising
3/3/2006
167-088Q-RUS
29
Implement Assembly
Implement Assembly
23499
24102
24103
Figure 57
Center Section Rack
Figure 58
Remove Bolts
Figure 59
Loosen U-bolts
Center Section Frame
Refer to Figure 57
NOTE: The air drill implement comes shipped in
racks via containers. There are two racks; the
center section rack and the wings rack. The cen-
ter section of the implement will need to be un-
loaded first.
Refer to Figure 58
2.
Remove all sections of the rack obstructing
center section removal from rack.
Refer to Figure 59
3.
Loosen u-bolts securing center section
frame to rack.
IMPORTANT: DO NOT completely remove u-
bolts securing frame to rack. This will be done
once the lift straps have been attached to frame.
Advertising