Loading materials, Hopper operations (s/n b1014r+), Loading seed (1.6 bu.hoppers) – Great Plains YP825A3P Operator Manual User Manual
Great Plains Manufacturing, Inc.
Hopper Operations (s/n B1014R+)
Refer to Figure 15 and Figure 16
• the lids have two spring clips, one at each end
• there is a molded handle at the rear end
hopper lid (although the lid is reversible).
To open a hopper:
Grasp the handle and snap lid off.
Park the lid length-wise on the side lip of the hopper,
using the hooked ends of each spring clip inside the
lid (see Figure 18 on page 25).
The seed hoppers themselves are designed to be
removed, but are not removed for routine operations.
Loading Seed (1.6 bu.hoppers)
Check that each hopper is correctly seated and
front and rear mounting bolts secured
hopper discharge opening lined up with
Open hopper lid
Inspect the hopper for leftover seed and debris.
Clean out anything other than the seed to be
planted. See “Material Clean-Out” on page 75.
(serial number B1014R+)