Great Plains YP1625A Operator Manual - Manual (Page 112)

108 YP1125A & YP1625A Table of Contents Index Great Plains Manufacturing, Inc.
401-625M Table of Contents Index 2013-08-13
Drive Chains, Contact Drive
(not present on hydraulic drive planters)
3 chains at each contact wheel;
6 total
Type of Lubrication: Chain Lube
Quantity = Coat thoroughly
Note: Lubricate chains any time there is a chance of
moisture, and when being stored at the end of the
planting season.
Drive Chains, Fertilizer Pump (Option)
(not present on hydraulic drive planters)
2 chains at each ground drive pump assembly;
2 total (typically)
Type of Lubrication: Chain Lube
Quantity = Coat thoroughly
Note: Lubricate chains any time there is a chance of
moisture, and when being stored at the end of the
planting season.
Drive Chains, Ground Drive
(not present on hydraulic drive planters)
2 chains to split center shaft;
2 total
Type of Lubrication: Chain Lube
Quantity = Coat thoroughly
Note: Lubricate chains any time there is a chance of
moisture, and when being stored at the end of the
planting season.
As Required
29740
As Required
28417
As Required
29741