Bio-Rad PDQuest 2-D Analysis Software - Manual (Page 10)

7
Fig. 4. Example PDQuest Basic Excision software screen.
The Discovery Series CD contains two separate software components that work together to
operate the ProteomeWorks Plus Spot Cutter: PDQuest operating software, and RS Config
camera driver software. Spot Cutter operation requires that all components be installed properly.
After installing the software, the Spot Cutter will be operated using PDQuest exclusively. The other
software component serves only to support the use of PDQuest with the Spot Cutter. PDQuest
and the supporting software are compatible with Windows 98, Windows NT 4.0, and Windows
2000.