Bio-Rad PDQuest 2-D Analysis Software - Manual (Page 5)

1.4 Safety Information
Caution Symbol
Read the manual before using the ProteomeWorks Spot Cutter. For technical assistance, contact
your local Bio-Rad or, in the U.S., call technical services at 1-800-4BIORAD (1-800-424-6723).
Definition of Symbols
Caution (refer to instruction manual).
Notice
This instrument is intended for laboratory use only. This product conforms to the "Class A"
standards for electromagnetic emissions intended for laboratory equipment applications. It is
possible that emissions from this product may interfere with some sensitive appliances when
placed nearby or in the same circuit as those appliances. The user should be aware of this
potential and take appropriate measures to avoid interference. This Bio-Rad instrument is
designed and certified to meet EN-61010-1 safety standards. Operation of this product is subject
to the condition that no harmful radio interference is caused and that any interference must be
accepted. EN-61010-1 certified products are safe to use when operated in accordance with the
instruction manual. This instrument should not be modified in any way. Alteration of this instrument
will:
• Void the manufacturer's warranty.
• Void the EN-61010-1 safety certification.
• Create a potential safety hazard.
Bio-Rad is not responsible for any injury or damage caused by the use of this instrument for
purposes other than those for which it is intended, or by modifications of the instrument not
performed by Bio-Rad or an authorized agent.
For technical assistance, contact your local Bio-Rad or, in the U.S., call technical services at
1-800-4BIORAD (1-800-424-6723).
* EN61010-1 is an internationally accepted electrical safety standard for laboratory instruments.
2
!
!
!