6 ejection pin – Bio-Rad PDQuest 2-D Analysis Software User Manual
Page 54
Advertising
![background image](/manuals/600248/54/background.png)
Diagram 1
Diagram 2
Diagram 3
7.6
Ejection Pin
If the ejection pin is not recovering after pushing out through the cutting tip, take the cutting tip off
and clean it out with the alcohol and wire method recommended above in Cutting Tip Cleaning,
Section 7.2.
51
Hexagonal
screws
Spindle Cutting Assy
Hexagonal
screws
Mounting
Carriage
Screws
Grounding Cable
Advertising
This manual is related to the following products: