Bio-Rad PDQuest 2-D Analysis Software - Manual (Page 33)

Section 4
Software Features Description
4.1 Spot Cutter Settings
Fig. 27. Settings buttons on BET (Basic Excision Tool) screen.
The Spot Cutter Settings button opens the settings dialog box for the cutter.
In the dialog box, the communications port to the spot cutter allows the choice of COM 1 or
COM 2 serial ports. COM 1 is the default and the best choice for most computers. The COM 2
port should only be used if COM 1 is already dedicated to another instrument.
Fig . 28. Spot Cutter Settings panel.
30