Bio-Rad BioLogic DuoFlow Pathfinder 80 System DuoFlow Chromatography System Starter Kit - Manual (Page 33)

30
Program the Instrument Setup
In the Setup screen, select the instruments and devices to be used for the Starter
Kit method. The icons grouped on the left hand side of the screen (refer to Figure 3,
Available Devices), show all the instruments and devices that can be connected
to the BioLogic DuoFlow systems.
The list of devices in the right box (Devices in Setup) identifies those devices
selected for use with a specific method. The initial default Devices in Setup are a
UV detector, a conductivity monitor, and an AVR7-3 inject valve, as these come
as standard with the BioLogic DuoFlow system. The DuoFlow QuadTec systems
includes a QuadTec UV/Vis detector in place of a UV detector.
a. Click on the Buffer Blending button in the Available Devices box. A dialog box
will appear. Choose Tris (25) mM from the buffer list and select OK. If desired,
enter the 1 or 2-point pH correction measured in Section 4.5.
4006208B.qxd 6/28/2004 11:04 AM Page 35