Bio-Rad SmartSpec Plus Spectrophotometer User Manual
Page 12
7. New Operator. When SmartSpec Plus prints a report, it includes the name of the
operator (if specified). You can add a new operators name to the list of operators in
Setup.
Press Select to toggle from No to Yes and the screen will change to
The keyboard will automatically switch to the alpha mode and you can use the keys to
enter a name with as many as eight characters. To enter an A in the first space, press the
2 key once. To enter a B, press the 2 key twice, and to enter a C, press it three times. To
move from the first space to the second space, press the right arrow key. When the last
letter of the name has been specified, press Enter. If you want to mix numerals with let-
ters, you can toggle back and forth between the alpha mode and number mode by press-
ing Alpha. When the LED on the Alpha key is lit, then the keyboard is in alpha mode.
You can enter a space by pressing the right arrow key twice.
8. Current operator. Press Select until the desired name is displayed on the screen and
then press Enter. This name will be printed on the final report.
9. Serial Port or Printer Data Export. This feature allows the user to export data using
either the printer, serial port or both. The screen will prompt for the desired configuration.
Use the Select key to toggle between the data export options.
10. Current time. The time will be displayed in the present format.
If the displayed time is incorrect, press Select and then Enter.
•
Use the number pad to enter the hour and press Enter, then enter the minutes and press
Enter again. After setting the time, press Select to change from AM to PM if you are
using the 12-hour format. Press Enter when complete.
11. Current date. The date will be displayed in the present format.
If the date is not correct, press Select to toggle from Yes to No and Enter.
•
Use the number pad to input the new date. Press Enter to move to the next field. Press
Select to set the day of the week. Press Enter when you are finished.
9
Want to add the name of
a new operator? No
Enter new operator's
name: (8 char):
Current time:
1:12 PM
is this OK?
Yes
Printer: On
Serial port: Off
Enter new time.
Select
AM or PM: ____ : ____ AM
Current date: (MM/DD/YY)
11/25/98 Is this OK? Yes
Enter new date in format
MM/DD/YY: ___/___/YY