Bio-Rad SmartSpec Plus Spectrophotometer - Manual (Page 4)

Section 1
General Safety Information
This instrument is intended for laboratory use only.
This product conforms to the "Class A" standards for electromagnetic emissions
intended for laboratory equipment applications. It is possible that emissions from this prod-
uct may interfere with some sensitive appliances when placed nearby or in the same circuit
as those applications. The user should be aware of this potential and take appropriate mea-
sures to avoid interference.
1.1 Caution Symbol
Read the manual before using the SmartSpec Plus Spectrophotometer. For technical
assistance, contact your local Bio-Rad office or, in the U.S., call technical services at
1-800-4BIORAD (1-800-424-6723).
Definition of Symbols
Caution (refer to accompanying documents)
1.2 Precautions
1. Do not use near flammable materials.
2. Always inspect the SmartSpec Plus for damaged components before use.
3. Always connect the system to the correct AC power source.
4. Always connect the correct instrument (printer or computer only) via the serial port
connector.
5. Do not pour liquid into the sample chamber. Thorough clean-up is needed after each
spill (Section 9.1).
6. Do not place objects on the SmartSpec Plus.
7. The SmartSpec Plus has no customer-serviceable components, do not open the unit.
Section 2
Packing List
The SmartSpec Plus Spectrophotometer (catalog number 170-2525) is shipped with the
following components. Upon receiving your instrument, please check that all items listed
below were shipped. If any items are missing or damaged, contact your local Bio-Rad
office.
Item Quantity
Instruction manual 1
Warranty card (please complete and return) 1
SmartSpec Plus Spectrophotometer 1
Power cable 1
Cuvette spring 1
Thermal paper roll 1
1
!
!
!
!
!