Bio-Rad SmartSpec Plus Spectrophotometer - Manual (Page 3)

Warranty
The SmartSpec Plus Spectrophotometer and accessories are warranted against defects
in materials and workmanship for one year. If any defects occur in the instruments or
accessories during this warranty period, Bio-Rad Laboratories will repair or replace the
defective parts at its discretion without charge. The following defects, however, are specifi-
cally excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than Bio-Rad Laboratories or an autho-
rized agent.
3. Damage caused by substituting alternative parts.
4. Use of fittings or spare parts supplied by anyone other than Bio-Rad Laboratories.
5. Damage caused by accident or misuse.
6. Damage caused by disaster.
7. Corrosion caused by improper solvent † or sample.
For any inquiry or request for repair service, contact Bio-Rad Laboratories. Inform
Bio-Rad of the model and serial number of your instrument.
Important: This Bio-Rad instrument is designed and certified to meet EN61010 *
safety standards. Certified products are safe to use when operated in accordance with
the instrument manual. This instrument should not be modified or altered in any way.
Alteration of this instrument will:
Void the manufacturer's warranty
Void the EN61010 safety certification
Create a potential safety hazard
Bio-Rad Laboratories is not responsible for any injury or damage caused by the use of
this instrument for purposes other than those for which it is intended, or by modifications
of the instrument not performed by Bio-Rad Laboratories or an authorized agent.
† SmartSpec Plus Spectrophotometer is not compatible with chlorinated hydrocarbons (e.g., chloroform), aromatic hydrocarbons
(e.g., toluene, benzene) or acetone. Use of organic solvents voids all warranties.
* EN61010 is an internationally accepted electrical safety standard for laboratory instruments.
!
!