Dell PowerEdge R905 - Manual (Page 113)

Installing System Components
113
Figure 3-24. Installing a Hard Drive Into a Drive Carrier
SAS Controller Cards
Removing a SAS Controller Card
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 67.
3 Disconnect the data cable(s) from the controller card.
1 screws (4) 2 drive carrier
3 hard drive
1
3
2