Installing the power distribution board – Dell PowerEdge R905 User Manual
Page 140
Advertising
140
Installing System Components
Figure 3-35.
Removing and Installing the Power Distribution Board
Installing the Power Distribution Board
1 Position the three retention slots on the power distribution board with the
three retention tabs on the bottom of the chassis. See Figure 3-35.
2 Secure the power distribution board with the seven screws.
3 Install the system board. See step 4 through step 14 in "Installing the
4 Install the power supplies. See "Replacing a Power Supply" on page 74.
1
retention notches (3)
2
power distribution board
3
screws (7)
4
retention tabs (3)
1
4
3
2
Advertising