Dell PowerEdge R905 - Manual (Page 176)

176
Jumpers and Connectors
Table 6-2. System Board Connectors
Connector Label Description
1 PCIE_Xn_n PCIe expansion slots (7)
2 INT_STORAGE SAS controller card connector
3 RAC_CONN remote access card connector
4 RAC_CONN2 connector for the 40-pin RAC cable
5 INT_SD SD card connector
6 RAC_CONN1 remote access card (RAC) connector
7 INT_USB internal USB connector
8 SATA SATA controller connector
9 CONTROL_PANEL control panel cable connector
10 An memory module connectors (8)
11 CPU1 processor 1 socket
12 PWR_3.3Stby_Cntrl Power distribution board signal connector
13 GROUND Power distribution board signal connector
14 12V 12-V power connector
15 CONN_Jn riser card connector (5)
16 CPU2 processor 2 socket
17 Bn memory module connectors (8)
18 PWRD_EN password jumper
19 NVRAM_CLR configuration jumper
20 Intrusion Detection intrusion switch connector
21 LOM Mezzanine
Card
NIC daughter card connector
22 BATTERY connector for the 3.0-V coin battery
23 TOE KEY TOE/iSCSI key connector
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
"Glossary" on page 183.