D. see figure 3-31 – Dell PowerEdge R905 User Manual
Page 130
Advertising
130
Installing System Components
Figure 3-31.
Removing and Installing the Peripheral Interposer Board
10 Remove the peripheral interposer board:
a
Press the spring-loaded blue retention tab, then slide the board
upward. See Figure 3-31.
b
When the board cannot move upward any farther, pull the board
toward the back of the system to remove it from the retention hooks.
1
power cable to
backplane
2
control panel cable
3
power cable from
power distribution
board
4
planar interface cable
5
retention tab
3
1
2
4
5
Advertising