Dell PowerEdge R905 - Manual (Page 92)

92
Installing System Components
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 67.
3 If you have expansion cards installed in slots 6 and 7, remove the cards
temporarily to install the card. See "Removing an Expansion Card" on
page 83.
4 Angle the card so that its NIC connectors are positioned toward the back-
panel card opening. See Figure 3-17.
Figure 3-17. Installing and Removing a NIC Daughter Card
1 retention standoff (2) 2 NIC daughter card connector
3 retention standoff holes (2) 4 NIC daughter card
5 support standoff 6 cutout
5
4
1
2
6
3