Dell PowerVault 735N (Rackmount NAS Appliance) - Manual (Page 69)

Removing and Replacing Parts: Dell PowerVault 735N Systems Service Manual
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/remove.htm[3/15/2013 4:18:18 PM]
1 Video connector (VGA) (not supported)
2 Serial port connector (COM1) (Administration port)
3 Serial port connector (COM2) (UPS port)
4 Parallel port connector (PARALLEL) (not supported)
5 Thumbscrew
6 Universal Serial Bus (USB) connectors (2)
7 Keyboard and mouse connectors (KYBD/MOUSE) (not used during normal operation)
8 Chassis intrusion switch connector (INTRUS1)
9 Network interface connector (ENET)
10 Battery connector (BATTERY)
11 Configuration jumpers
12 Power input connector (POWER3)
13 hardware key connector for optional RAID controller (RAID_KEY) (not supported)
14 Power input connector (POWER1)
15 Primary microprocessor (PROC_2)
16 Primary microprocessor (PROC_1)
17 DIMM sockets (DIMM_A–DIMM_D)
18 Interposer board interface cable connector (I/O CONN)
19 SCSI backplane board interface cable connector (BACKPLANE)
20 U160/m SCSI connector (SCSI2 [Channel B])
21 U160/m SCSI connector (SCSI2 [Channel A])PCI riser board connector (RISER)
22 DIMM socket for optional RAID controller (DIMM_RAID) (not supported)
23 PCI riser board connector (RISER)
Battery