Dell PowerVault 735N (Rackmount NAS Appliance) - Manual (Page 75)

Jumpers, Switches, and Connectors: Dell Powervault 735N Systems Service Manual
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/jumpers.htm[3/15/2013 4:18:20 PM]
Connector or Socket Description
BACKPLANE Hot-pluggable SCSI backplane board interface cable connector
BATTERY Battery connector
COMn Serial port connectors; sometimes referred to as COM1 and COM2
DIMM_x DIMM sockets
DIMM_RAID DIMM socket for integrated RAID controller (not supported)
ENET Ethernet connector
INTRUS1 Intrusion-alarm switch connector
KYBD Keyboard connector
MOUSE Mouse connector
PARALLEL Parallel port connector; sometimes referred to as LPT1
POWERn Power connector
PROC_n Microprocessor guide bracket assembly and connectors
RAID_KEY Socket for integrated RAID controller hardware key (not supported)
SCSI1, SCSI2 Ultra3 SCSI host adapter connector
USBn USB connector
VGA Video connector
SCSI Backplane Boards
Figure 2 shows the location of the connectors on the back of the SCSI backplane board.
Figure 2. SCSI Backplane Board Connectors
1 Thumbscrew
2 SCSI backplane board
3 Ultra3 SCSI connector
(SCSIB)
4 System board interface
connector (PLANAR)
5 Power connector
(POWER2)
6 Ultra3 SCSI connector
(SCSIA)