Dell PowerVault 735N (Rackmount NAS Appliance) - Manual (Page 74)

Jumpers, Switches, and Connectors: Dell Powervault 735N Systems Service Manual
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/jumpers.htm[3/15/2013 4:18:20 PM]
Table 1. System-Board Jumper Settings
Jumper Setting Description
CARDBIOS Reserved (do not change).
ISA_CLR (default) The ISA configuration settings are retained at system boot.
The ISA configuration settings are cleared at next system boot. If the ISA
configuration settings become corrupted to the point where the system
will not boot, install the jumper plug and boot the system. Remove the
jumper before restoring the ISA configuration information.
PASSWD (default) The password feature is enabled.
The password feature is disabled.
SPREAD Reserved (do not change).
jumpered unjumpered
System Board Labels
Table 2 lists the connectors and sockets located on the system board .
Table 2. System Board Connectors and Sockets