Dell PowerVault 735N (Rackmount NAS Appliance) - Manual (Page 76)

Jumpers, Switches, and Connectors: Dell Powervault 735N Systems Service Manual
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/jumpers.htm[3/15/2013 4:18:20 PM]
7 Data cable connector to
the fifth hard-disk drive
SCSI backplane board
(SCSI ID 4)
Interposer Board Connectors
Figure 3 shows the connectors and sockets located on the interposer board.
Figure 3. Connectors on the Interposer Board
1 Control panel cable connector
2 Cooling fans wiring harness connector
(P2)
3 System board interface cable
connector (P1)
4 Interposer board power cable
connector (P3)
5 Diskette drive/CD-ROM drive interface
connector (J1)
Disabling a Forgotten Password
The system's software security features include a supervisor password and a user password, which are
discussed in detail in "Using the System Setup Program" of the User's Guide. A password jumper on the
system board enables these password features or disables them and clears any password(s) currently in
use.
To disable a forgotten supervisor password or user password, perform the following steps.
NOTICE: See " Protecting Against Electrostatic Discharge " for information on protecting the system
from electrostatic discharge.