Dell PowerVault 735N (Rackmount NAS Appliance) - Manual (Page 73)

Jumpers, Switches, and Connectors: Dell Powervault 735N Systems Service Manual
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/jumpers.htm[3/15/2013 4:18:20 PM]
Switches
Switches control various circuits or functions in the computer system. The switches that you are most likely
to encounter are dual in-line package (DIP) switches, which are normally packaged in groups of two or more
switches in a plastic case. Two common types of DIP switches are slide switches and rocker switches (see
the following illustration).
1
Rocker switch
2
Slide switch
Each of these switches has two positions, or settings (usually on and off). To change the setting of a slide
switch, use a small, pointed object such as a small screwdriver or a straightened paper clip to slide the switch
to the proper position. To change the setting of a rocker switch, use the screwdriver or paper clip to press
down on the appropriate side of the switch. In either case, do not use a pen, pencil, or other object that might
leave a residue on the switch.
System Board Jumpers
Figure 1 shows the location of the configuration jumpers on the system board. Table 1 lists the function of
these jumpers.
Figure 1. System Board Jumpers