Processors, Removing a processor, See "processors" on – Dell PowerVault NX3100 User Manual

Page 107

Advertising
background image

Installing System Components

107

4 Insert the USB memory key into the USB connector. See Figure 3-18.
5 Close the system. See "Closing the System" on page 67.
6 Reconnect the system to its electrical outlet and turn the system on,

including any attached peripherals.

7 Enter the System Setup program and verify that the USB key has been

detected by the system. See "Using the System Setup Program Navigation

Keys" on page 42.

Figure 3-18. Removing and Installing a USB Memory Key

Processors

Removing a Processor

CAUTION:

Many repairs may only be done by a certified service technician.

You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.

1 Prior to upgrading your system, download the latest system BIOS version

on

dell.com/support.

2 Turn off the system, including any attached peripherals, and disconnect

the system from the electrical outlet.

1

USB memory key connector

2

USB memory key

2

1

Advertising