System messages – Dell PowerVault NX3100 User Manual

Page 23

Advertising
background image

About Your System

23

System Messages

System messages appear on the screen to notify you of a possible problem

with the system.

NOTE:

If you receive a system message not listed in the table, check the

documentation for the application that is running or the operating system's

documentation for an explanation of the message and recommended action.

Message

Causes

Corrective Actions

128-bit Advanced

ECC mode

disabled. For

128-bit Advanced

ECC, DIMMs must

be installed in

pairs. Pairs must

be matched in

size and

geometry.

The Advanced ECC option

was enabled in BIOS,

but is no longer valid due to

an unsupported memory

configuration, possibly a

faulty or removed memory

module. The Advanced

ECC setting has

been disabled.

Check other messages for a

faulty memory module.

Reconfigure the memory

modules for Advanced

ECC mode. See "System

Memory" on page 82.

Alert! Advanced

ECC Memory Mode

disabled! Memory

configuration

does not support

Advanced ECC

Memory Mode.

Advanced ECC Memory

Mode was enabled in the

system setup program, but

the current configuration

does not support Advanced

ECC Memory Mode.

A memory module

may be faulty.

Ensure that the memory

modules are installed in a

configuration that supports

Advanced ECC Memory

Mode. Check other system

messages for additional

information for possible

causes. For memory

configuration information,

see "General Memory

Module

Installation Guidelines" on

page 83. If the problem

persists,

see "Troubleshooting System

Memory" on page 137.

Advertising