Removing a hard drive from a hard-drive carrier, Removing a hard drive from a, Hard-drive carrier – Dell PowerVault NX3100 User Manual
Page 72
Advertising
72
Installing System Components
4 With the lever on the hard drive carrier open, slide the hard drive into
the drive bay until the carrier contacts the backplane. See Figure 3-6.
5 Close the handle to lock the drive in place.
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-7.
Figure 3-7. Installing a Hot-Swap Hard Drive Into a Drive Carrier
1
hard drive
2
SAS/SATA indicator
3
drive carrier
4
screws (4)
2
1
3
4
Advertising