Entering the idrac configuration utility – Dell PowerVault NX3100 User Manual
Page 61
Advertising
Using the System Setup Program and UEFI Boot Manager
61
• Change the administrative username and password and
manage user privileges.
• View System Event Log (SEL) messages or clear messages from the log.
For additional information on using iDRAC6, see the documentation for
iDRAC6 and systems management applications.
Entering the iDRAC Configuration Utility
1 Turn on or restart your system.
2 Press <Ctrl><E> when prompted during POST.
If your operating system begins to load before you press <Ctrl><E>,
allow the system to finish booting, restart your system and try again.
Advertising