Troubleshooting an internal usb key, Troubleshooting an internal – Dell PowerVault NX3100 User Manual

Page 139

Advertising
background image

Troubleshooting Your System

139

20 As the system boots, observe any error message that appears and the

diagnostic indicators on the front of the system.

21 If the memory problem is still indicated, repeat step 14 through step 20 for

each memory module installed.
If the problem persists after all memory modules have been checked,

see "Getting Help" on page 157.

Troubleshooting an Internal USB Key

CAUTION:

Many repairs may only be done by a certified service technician.

You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.

1 Enter the System Setup program and ensure that the USB key port is

enabled. See "Integrated Devices Screen" on page 48.

2 Turn off the system and attached peripherals.
3 Open the system. See "Opening the System" on page 66.
4 Locate the USB key and reseat it. See "Internal USB Memory Key" on

page 106.

5 Close the system. See "Closing the System" on page 67.
6 Turn on the system and attached peripherals and check if the USB key

is functioning.

7 If the problem is not resolved, repeat step 2 and step 3.
8 Insert a different USB key that you know works properly.
9 Close the system. See "Closing the System" on page 67.

10 Turn on the system and attached peripherals and check if the USB key

is functioning.

11 Reconnect the system to the electrical outlet, and turn on the system

and attached peripherals.
If the problem is not resolved, see "Getting Help" on page 157.

Advertising