Dell PowerVault NX3100 - Manual (Page 36)

36 About Your System
Unexpected
interrupt in
protected mode.
Improperly seated memory
modules or faulty
keyboard/mouse
controller chip.
Reseat the memory modules.
See "Troubleshooting
System Memory" on
page 137. If the problem
persists, see "Getting Help"
on page 157.
Unsupported CPU
combination.
Unsupported CPU
stepping
detected.
Processor(s) is not supported
by the system.
Install a supported processor
or processor combination.
See "Processors" on
page 107.
Unsupported DIMM
detected. The
following DIMM
has been
disabled: x.
Invalid memory
configuration. The system
runs but with the specified
memory module disabled.
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 83.
Unsupported
memory
configuration.
DIMM mismatch
across slots
detected:
x,x,...
Invalid memory
configuration.
Memory modules are
mismatched in the
specified slots.
Ensure that the memory
modules are installed in a
valid configuration.
See "General Memory
Module
Installation Guidelines" on
page 83.
Unused memory
detected. DIMM’s
installed in the
following slot
are not available
when in mirror
mode: x,x,x.
The memory configuration
is not optimal for
mirroring Mode.
Modules in the
specified slots are unused.
Reconfigure the memory for
Memory Mirroring Mode, or
change the memory mode to
Optimized or Sparing in the
BIOS setup screen. See
"System Memory" on
page 82.
Message Causes Corrective Actions