Closing the system – Dell PowerVault NX3100 User Manual

Page 67

Advertising
background image

Installing System Components

67

Figure 3-3. Removing and Replacing the System Cover

Closing the System

1 Lift the latch on the system cover.
2 Place the cover onto the chassis and offset it slightly back so that the two

hooks on the back edge of the cover fit the corresponding tabs on the back

edge of the chassis. See Figure 3-3.

3 Slide the cover towards the front of the chassis and press down the latch.
4 Rotate the latch release lock in the clockwise direction to secure the cover.
5 Reconnect the system and peripherals to their electrical outlets, and turn

on the system.

1

system cover latch

2

latch release lock

1

2

Advertising